Selective Solder Machine

KISS-102 Selective Solder Machine

KISS-102 Selective Solder Machine

KISS-102 Selective Solder Machine

Set up of the KISS-102 involves drawing the bead path on the image of the board.The system is very easy to set up and operate. The computer screen displays an image of the bottom of the panel. You simply draw out on the image where you want the bead of solder to go. We have different sized nozzles including long nozzles which allow the machine to operate effectively as a wave solder machine.

The system operates with a nitrogen jet to prevent bridging.

Minimum panel size: 2″ x 2″ (50 x 50mm)

Maximum panel size: 16″ x 16″ (400 x 400mm)

Please allow a clearance of at least 3mm between through-hole pads and SMT components to avoid the solder bead.

April 2014

Ace Production Technologies